Bluetooth Pairing (iOS)

1. Turning on the 5K

   • To turn on the 5 K, press and hold the bottom button with the Blue LED for over 3 seconds.

2. Entering Pairing Mode

   • Press the top button with the Blue LED for over 3 seconds to enter pairing mode.

   • The Red and Blue LEDs will blink alternately when the device enters pairing mode.

3. iOS Setting Up Bluetooth on an iPhone

   • https://support.apple.com/guide/iphone/bluetooth-accessories-iph3c50f191/ios

   • Search for Bluetooth devices (Scan), and select Qudelix-5K from the list.

Bluetooth Scan & Pairing

1. Pairing Complete

   • Once pairing is successfully completed, Qudelix-5K Connected ⓘ will appear under MY DEVICES, as shown in the image below.

iOS Bluetooth Paired Device

Displaying as Connected ⓘ means the device is recognized as an audio device. If it only shows as Connected without ⓘ, it indicates that the Qudelix iOS app is connected to the device via a BLE (Bluetooth Low Energy) link. For more details, refer to the iOS app connection section.